Search
Highlights ↵
Product Descriptions
Specification
| Listening time | Up to 6.5 hours listen (earbuds); charging case provides up to a total of 13 hours power for recharging earbuds* |
| Standby time | Up to 14 days* |
| Audio | HQ custom SBC codec, 6 mm custom dynamic drivers, Frequency response 20-20,000 Hz, 20 db passive noise reduction, Total Harmonic Distortion <3%, sensitivity 102 dBspl/mW @ 1 kHz
|
| Noise reduction for calls | MEMS microphone with digital signal processing (DSP) and full duplex echo noise reduction
|
| Moisture protection | Sweatproof design with nano-coating by P2i on headphones |
| Charge connector | Micro USB charging |
| Charge time (maximum) | 2.5 hours (Power requirements 5V DC - 180 mA) |
| Battery type | Rechargeable, non-replaceable lithium-ion polymer |
| Bluetooth v3.0 | A2DP 1.2, AVRCP v1.5, Wideband audio HFP v1.7, HSP v1.1 |
| Headset battery meter | On-screen for iOS devices |
| Weight | 19 g/0.67 oz |
| Operating + storage temp | 14°F to 122°F/-10°C to +50°C |
| Operating distance (range) | Up to 33 ft/10 m from phone or tablet |
| * Performance is dependent upon battery and may vary by device. | |
What's in the box ↵
Warranty ↵
Highlights ↵
Product Descriptions
Specification
| Listening time | Up to 6.5 hours listen (earbuds); charging case provides up to a total of 13 hours power for recharging earbuds* |
| Standby time | Up to 14 days* |
| Audio | HQ custom SBC codec, 6 mm custom dynamic drivers, Frequency response 20-20,000 Hz, 20 db passive noise reduction, Total Harmonic Distortion <3%, sensitivity 102 dBspl/mW @ 1 kHz
|
| Noise reduction for calls | MEMS microphone with digital signal processing (DSP) and full duplex echo noise reduction
|
| Moisture protection | Sweatproof design with nano-coating by P2i on headphones |
| Charge connector | Micro USB charging |
| Charge time (maximum) | 2.5 hours (Power requirements 5V DC - 180 mA) |
| Battery type | Rechargeable, non-replaceable lithium-ion polymer |
| Bluetooth v3.0 | A2DP 1.2, AVRCP v1.5, Wideband audio HFP v1.7, HSP v1.1 |
| Headset battery meter | On-screen for iOS devices |
| Weight | 19 g/0.67 oz |
| Operating + storage temp | 14°F to 122°F/-10°C to +50°C |
| Operating distance (range) | Up to 33 ft/10 m from phone or tablet |
| * Performance is dependent upon battery and may vary by device. | |
What's in the box ↵
Warranty ↵
